Connect over Serial RS-232 3-4
Run Disconnected 3-5
Dashboard 3-6
Instrument Information and Logging 3-7
Instrument Status and Connectivity 3-8
Eddy Covariance Flux Graphs 3-10
Data Display 3-13
Configuring Eddy Covariance Measurements 3-17
Eddy Covariance Checklist 3-18
System Clock 3-21
Configuring the USB Log File 3-22
Entering the Site Description 3-23
Entering Anemometer Information 3-25
Entering CO2/H2O Analyzer Information 3-31
Entering LI-7700 Information 3-37
Entering Biomet System Information 3-39
Connecting with the SmartFlux or SmartFlux 2 System 3-43
Begin Logging Data 3-44
Transferring Logged Data 3-47
Using the SmartFlux System or SmartFlux 2 3-49
Express Processing 3-49
Overview of Advanced Processing 3-50
SmartFlux Results Files 3-60
Section 4. Calibration
How Stable are Zero and Span? 4-1
Checking the Zero 4-2
Checking the Span 4-3
Step-by-Step Calibration Instructions 4-5
Zero H2O 4-7
Considerations for Setting the Secondary Span 4-8
Step-by-Step Secondary CO2 Span 4-8
Step-by-Step Secondary H2O Span 4-9
What Actually Happens 4-9
Section 5. Maintenance
Schedule 5-1
Cleaning the Optical Path 5-2
Opening the Optical Bench 5-3
Replacing the Fuses 5-4
Power Supply Fuse 5-5
Accessory Fuse 5-5
Replacing the Internal Chemicals 5-5
vi
To Next Page
