Need help?Do you have a question about the LI-COR LI-870 and is the answer not in the manual?
General| Measurement Principle | Non-Dispersive Infrared (NDIR) Absorption |
|---|---|
| Operating Temperature Range | 0 to 50 °C |
| Data Logging | Yes |
| Response Time | ≤ 1 second |
| Data Storage | Internal memory |
| Communication | USB, RS-232 |
| Outputs | Analog, Digital |
| Display | LCD |
| Power Supply | 12 VDC |
| CO₂ Measurement Range | 0 to 3000 ppm |
Details on checking the packing list for the LI-870.
Overview of the portable gas analyzer for soil CO2 flux.
Description of the cable and tubing assembly for connecting the LI-870.
Information about the shoulder strap for carrying the LI-870.
Details on the split ring and standoff for strap attachment.
List of items included in the LI-870 spares kit.
Information on software for calibrating the LI-870 and viewing data.
Steps for connecting the USB data, tubing, and power cables.
How to power on the analyzer and warm-up procedures for measurements.
Guidelines for post-measurement flushing and storage conditions.
Steps to resolve issues where the software doesn't recognize the LI-870.
Addresses problems with instrument zeroing and spanning, often due to optics.
Solutions for incorrect CO2 readings or unstable measurements.
Detailed steps for removing, cleaning, and reassembling the optical bench.
How to connect the LI-870 to software for calibration procedures.
Instructions for setting zero and span for accurate measurements.
To Next Page
