To Next PageTo Next Page
Need help?Do you have a question about the Lian-Li LANCOOL III RGB and is the answer not in the manual?
General| Case Type | Mid Tower |
|---|---|
| Color | Black, White |
| Motherboard Compatibility | E-ATX, ATX, Micro-ATX, Mini-ITX |
| Materials | Steel, Tempered Glass, Plastic |
| Side Panel | Tempered Glass |
| Expansion Slots | 7 |
| 2.5" Drive Bays | 4 |
| Fan Support Front | 3 x 120mm or 2 x 140mm |
| Fan Support Top | 3 x 120mm or 2 x 140mm |
| Fan Support Bottom | 2 x 120mm |
| Radiator Support Front | Up to 360mm |
| Radiator Support Top | Up to 360mm |
| Maximum GPU Length | 420 mm |
| Maximum CPU Cooler Height | 185 mm |
| Maximum PSU Length | 220 mm |
| RGB Lighting | Yes |
| Front I/O | USB 3.0 x 1, USB Type-C x 1, Audio x 1 |
| Fan Support Rear | 1 x 120mm |
| Radiator Support Rear | 120mm |
| Included Fans | 3 x 120mm |
Details front panel I/O ports and buttons for the standard model.
Details the PSU tray for ATX power supplies with a dust filter.
Explains I/O port functions for the standard LANCOOL 3 model.
Explains I/O port functions for the LANCOOL 3R ARGB FAN model.
Provides instructions for PSU installation, including clearance for longer units.
Instructions on removing HDD cages to accommodate longer PSUs.
Guidance on adjusting the HDD cage position for PSU length and radiator thickness.
Details the process for installing 2.5" SSDs, including rubber pad orientation.
Details the process for installing 3.5" HDDs, including rubber pad orientation.
Lists supported fan sizes and radiator capacities for the chassis.
Details the assembly of the anti-sag bracket for graphics cards.
Specifies the maximum CPU cooler height supported by the case.
Indicates the maximum PSU length that can be installed.
Shows the maximum GPU length and width supported.
