Upright GPU Bracket for 40 Series GPU- O11DE-9X / O11DE-9W
包裝內 容 物
Package contents /
O11DE-9X(W) includes all A ~ J , O11DE-10X(W) only includes B , H, I, J .
O11DE-9X(W)包含 A ~ J的所有零件,O11DE-10X(W)僅有 B , H, I, J 零件。
!
O11DE-10X(W) must use with components from O11DE-2X(W) or O11DE-6X(W).
O11DE-10X(W) 需要搭配O11DE-2X(W) / O11DE-6X(W) 零件。
!
Upright GPU Bracket Upgrade Kit for 40 Series GPU- O11DE-10X / O11DE-10W
x 5
O11DE-9 O11DE-9 O11DE-9 O11DE-9 O11DE-9
O11DE-9
O11DE-10
O11DE-9
O11DE-10
O11DE-9
O11DE-10
Instructions /
安裝 指南
O11DE-9
O11DE-10
O11DE-9
Install the upright GPU
holder to the back bracket.
將垂直顯卡 架 安裝於背架上 。
Water block GPU width
clearence :
⽔道版顯卡 寬 度限制:
Second slot
第⼆槽
First slot
第⼀槽
≦151 mm
≦158 mm
Remove the
graphics card mounting tray.
卸下顯卡安 裝 托盤。
Installation /
安裝
J
Installation for
GPU mount at the
first slot.
使⽤第⼀槽 時 的安裝
⽅式。
Installation for
GPU mount at the
second slot.
使⽤第⼆槽 時 的安裝
⽅式。
Install at the 1st slot
and plug the display
output cable.
安裝第⼀槽 , 接上顯卡
輸出端線材 。
Install at the 2nd slot
and plug the display
output cable.
安 裝 第 ⼆槽, 接 上 顯卡
輸 出 端 線材。
Height adjustable according
to the GPU length and the
power connection position.
依 安 裝 顯 ⽰ 卡 ⾧ 度 與 供 電 插
槽 位 置 , 調 整 安 裝 ⾼ 低 。
顯 卡 寬 度量測
⽰ 意 。
Graphics card
width
measurement.
L型 ⽀ 撐 架安裝 有 兩 個⽅向 , 五 種⽅式 , 請 依說明 評 估
顯 卡 寬 度、供 電 插 槽位置 評 估 ,然後 進 ⾏ 安裝。
There are 5 ways to install the big L-type support bracket in 2 directions.
Refer to below supporting GPU width and the socket for power cable to
determine which way to install.
or
或
1 OF 2
GPU supporting width / 顯卡限制寬度
1. MB width maximum: 244mm.
2. Careful to avoid MB sockets.
3. Recommend install way 1
when mounting O11DE-4X(W),
to avoid interference with the
fan bracket.
1 . 主 板 限 寬 :2 4 4 m m。
注 意 避 開 主 板 接 ⼝ 位 置 。2 .
安 裝O 1 1 D E - 4 X ( W )時 ,3 .
⾵ 扇 ⽀ 架 會 ⼲ 涉 , 建 議 使
⽤ ⽅ 式1安 裝 。
Screw with D.
使⽤D螺絲鎖。
Screw with D,
won't fit when
Installing a
120 mm fan.
使⽤D螺絲鎖,
但有安裝
120 mm⾵扇時
則無法使⽤。
Can' t mount way 2 & 3 when installing
120 mm fan on the fan bracket.
⾵ 扇 ⽀ 架 上 安 裝1 2 0m m ⾵ 扇 時 , 無 法
使 ⽤ ⽅ 式2 和3。