Lian-Li UNI FAN SL RGB User Manual

- 1 - - 2 -
安南
INSTALLATION GUIDE
FAN CABLE INSTALLATION
風扇線材安裝
UNI FAN SL
Revolutionized Daisy-Chain ARGB Fan
RGB
1
2
1
2
Fixed
Release
Fixed
Release
FAN TO FAN CONNECTION
風扇連接風扇
Note! When using the UNI FAN AL in a custom water cooling configuration, make
sure that the fittings on the radiators do not interfere with the contact point on the
side of the fans. We suggest to use the insulating tape to isolate contact points.
在開式冷配置中UNI FAN AL，󰇽確保散󰆆器上的󰔞接頭不會干
擾風扇側面的接觸點，議絕緣膠帶隔󰔵接觸點。
注意!

Lian-Li UNI FAN SL RGB Specifications

General

Brand	Lian-Li
Model	UNI FAN SL RGB
Category	Computer Hardware
Language	English

Summary

Fan to Fan Connection

Water Cooling Configuration Note

When using UNI FAN AL in custom water cooling, ensure radiator fittings do not interfere with fan contact points. Use insulating tape.

Fan Cable Installation

Controller Cable Connection

Controller and Cable Connections

Details on connecting the controller to fans, PSU, and USB for power and control.

Incorrect LED Connector Warning

Warning against connecting the wrong LED connector to the 5V ARGB header to prevent permanent damage.

Motherboard Sync

Motherboard 5V Address LED Header

Guide for connecting the fan controller to the motherboard's 5V ARGB header for synchronization.