Liebert EM - Serial Ports

Getting Started With the Web Interface
37
5.7.4 Serial Ports
To view the Serial Port 1 and 2 windows, log in (see 5.1 - Open the Web Interface and Log In) and:
• Click on the Sys Info tab at the top of the Web interface, as shown below.
•The Serial Port 1 and Serial Port 2 links on the left side of the window determine which port
information is displayed in the right side of the window. Do not change these settings.
NOTE
The Serial Port 1 and 2 windows are reserved. This section shows the default settings, which
should NOT be changed.
Serial Port
links
Sys Info tab
Network
settings
Serial
settings