Liebert HPC-S 006 - Page 41

Application Consideration
10 -- 5
Liebert HPC---S 006---022---PD---273571---01.03.2012
Fig. 10d --- Lifting instructions with straight shackle (baricentric axis)
Models
Fans
Number
“A1+ A 2”
(m)
CB0/FB0 006--- 007
CG0/FG0 006
1
≈5
CB0/FB0 009--- 011---
014--- 015
CG0/FG0 007 --- 009 ---
011
2
≈6
CB0/FB0 018--- 019---
022
CG0/FG0 014 --- 015 ---
018
3
≈6
Tab. 10g --- Shipping weight and unit baricentre position (“G”) --- Unit without tank and pumps
Models Size
Unit without tank and pumps
“X base“
(mm)
“Xg“
(mm)
“Yg“
(mm)
Shipping weight (kg)
CB0
006 2000 851 598 722
007 2000 848 598 738
009 3000 1237 598 895
011 3000 1166 567 1035
014 3000 1095 577 1152
015 3000 1083 576 1170
018 4000 1450 578 1392
019 4000 1440 578 1404
022 4000 1438 578 1444
CG0
006 2000 837 598 723
007 3000 1211 598 888
009 3000 1231 597 934
011 3000 1150 567 1049
014 4000 1461 579 1357
015 4000 1446 579 1375
018 4000 1439 578 1418
FB0
006 2000 938 598 860
007 2000 934 598 876
009 3000 1364 598 1062
011 3000 1306 572 1248
014 3000 1236 580 1369
015 3000 1224 579 1387
018 4000 1640 582 1678
019 4000 1630 581 1690
022 4000 1623 581 1728
FG0
006 2000 925 598 861
007 3000 1343 598 1055
009 3000 1372 597 1147
011 3000 1293 572 1266
014 4000 1653 582 1643
015 4000 1638 582 1661
018 4000 1626 581 1702
LIFTING SYSTEM
WITH
STRAIGHT SHACKLE
N.B:
The lifting point has to be on
the vertical baricentric axis,
which is individualized by
symbols (“G”) indicated on
the base.
N.B. LIFT IN THE BARICENTRE LINE OF THE UNIT
STRAIGHT SHACKLE Ø14
(UNI 1947) “A” TYPE (OPTIONAL)
PART.”A”
”A1”
”A2”
”Yg”
”Yg”
”G”
”G”
X base