Need help?Do you have a question about the Liebert MATRIX S 004-016 and is the answer not in the manual?
Introductory remarks about the manual's purpose and scope.
Manufacturer's liability disclaimer regarding installation and usage.
Procedure for inspecting the unit upon delivery for damage or missing parts.
Overview of the MATRIX S units and their design.
Specifies the acceptable environmental and operational ranges for the unit.
Information on the noise emissions of the units as per ISO standards.
Instructions for safely moving and handling the unit.
Requirements for selecting a suitable and level surface for unit installation.
Defines the minimum space required around the unit for airflow and maintenance.
Detailed guide for connecting the chilled water circuit and components.
Instructions for safely routing the discharge from safety valves.
Guidelines for making correct and safe electrical power connections.
Essential checks to perform before starting the unit for the first time.
Step-by-step guide for initial startup or restarting after extended downtime.
Procedures for correctly starting and stopping the chiller unit.
Information on using chillers with water-glycol mixtures for special applications.
Explanation of the freecooling system for pre-cooling using ambient air.
Information on operating the unit via the microprocessor control system.
Procedures and precautions for charging the refrigeration circuit with refrigerant.
Guidelines and procedures for topping up or charging the compressor oil.
Detailed steps for adding oil to the compressor crankcase.
Instructions for adjusting the thermostatic expansion valve for optimal performance.
Guidance on ordering and using original spare parts for maintenance.
Procedures and safety precautions for dismantling the unit for maintenance.
Details on the available centrifugal pump sets and their specifications.
Information about the 20% heat recovery option for the water chiller.
Details regarding the 100% heat recovery option for enhanced energy efficiency.
Information on essential accessories for the hydraulic circuit, like expansion vessels.
Description of the inertia tank option for improved compressor operation and stability.
To Next Page
General
