Need help?Do you have a question about the Liebert SBH 023 and is the answer not in the manual?
Inspect unit on delivery for transport damage or missing components.
Overview of MATRIX S units, their design, and technology.
Defines acceptable ranges for ambient/water temps, flow rates, and electrical supply.
Guides for safe lifting, handling, placement, and anti-vibration support.
Specifies minimum clearance for airflow and maintenance access around the unit.
Detailed steps for connecting the chilled water circuit and its components.
Instructions for safe electrical hook-up, including cable sizing and voltage checks.
Pre-startup checklist for water, electrical, and pressure parameters.
Step-by-step guide for initial unit startup and essential checks.
Procedures for normal operation, including compressor preheating and shutdown.
Detailed instructions for charging the refrigerant circuit, including safety and verification.
Procedure for adjusting the TEV to ensure optimal superheating for compressor protection.
Guidelines and safety precautions for dismantling the unit by qualified technicians.
Information on the optional pump set, its specifications, and operating parameters.
Details on partial (20%) and total (100%) heat recovery systems.
Explains the function and benefits of the inertia tank for compressor operation.
To Next Page
General
