LIFAN Power USA 168F-2

Questions and Answers

K
Kaitlin MejiaAug 8, 2025
Why is my LIFAN Power USA Engine difficult to start?
- J
  Joseph MartinAug 8, 2025
  Your LIFAN Power USA Engine might be hard to start due to several reasons: * There might not be enough fuel in the fuel tank, or the fuel cock could be closed. In this case, fill the fuel tank and open the fuel cock. * The air vent in the filler cap may be clogged. Try dredging the air vent. * The fuel cock could be clogged. Clean it first, and then dredge it. * The main jet might be improper or clogged. Readjust or clean it, and blow to clear any blockages. * The needle valve might be closed improperly, or the start hole could be clogged. Dismantle and repair the needle valve, then clean it and blow to clear any blockages. * The floater might be damaged or sticking. Repair the floater.
K
kimberlymayAug 14, 2025
What to do if my LIFAN Power USA Engine fuel cock is clogged?
- S
  Stephanie SchultzAug 14, 2025
  If the fuel cock of your LIFAN Power USA Engine is clogged, the suggested solution is to clean it first and then dredge it.
J
Jesse BruceAug 20, 2025
How to fix a clogged air vent in the filler cap of LIFAN Power USA Engine?
- K
  kristin63Aug 20, 2025
  If the air vent in the filler cap of your LIFAN Power USA Engine is clogged, dredge the air vent to resolve the issue.
J
Jillian AndradeAug 27, 2025
What to do if the needle valve is closed improperly in LIFAN Power USA Engine?
- K
  Kari BartlettAug 27, 2025
  If the needle valve is closed improperly or the start hole is clogged in your LIFAN Power USA Engine, dismantle and repair the needle valve, then clean it and blow to get through.
N
nunderwoodSep 1, 2025
How to clean clogged main jet in LIFAN Power USA Engine?
- J
  Julie JohnsonSep 1, 2025
  If the main jet is clogged in your LIFAN Power USA Engine, readjust or clean it, and blow to get through.

Summary

Safety Precautions

Key Safety Guidelines

Essential safety measures for safe operation and handling of the engine.

Pre-Operation Inspection

Engine Oil Check and Refill

Starting the Engine

Engine Operation

Stopping the Engine

Exhaust Control System

Maintenance Schedule

Engine Maintenance Schedule

Schedule for regular engine maintenance based on operating hours and time intervals.

Service Procedures

Transport, Storage, and Removal

Troubleshooting

Troubleshooting: Starting Difficulties

Common causes and remedies for engine starting problems.

Troubleshooting: Low Power Output

Diagnosing and resolving issues related to reduced engine power.

Troubleshooting: Rough Engine Operation

Identifying and fixing causes of uneven or rough engine running.

Troubleshooting: Engine Stalling

Causes and solutions for the engine stopping unexpectedly during operation.

Troubleshooting: Engine Overheating

Identifying and addressing reasons for the engine becoming excessively hot.

Troubleshooting: Abnormal Engine Noise

Diagnosing and resolving abnormal sounds produced by the running engine.

Specifications

Engine Main Specifications

LIFAN Power USA 168F-2 Specifications

General

Displacement	196cc
Bore x Stroke	68mm x 54mm
Compression Ratio	8.5:1
Max Power	5.5 HP
Max Power RPM	3600 RPM
Max Torque RPM	2500 RPM
Fuel Type	Gasoline
Fuel Tank Capacity	3.6 L
Oil Capacity	0.6 L
Starting System	Recoil Start
Shaft Type	Horizontal
Engine Type	4-Stroke, Single Cylinder
Dry Weight	15 kg