5
● Make sure not to connect the battery leads in reverse
order, or short-circuit or breaker’s cutting may result.
CONTROL CONNECTION OF REMOTE DISTANCE (OPTION)
The holes in levers of both the choke and throttle are used for mounting optioned steel wires. The diagrams
shown illustrate how to mount a solid steel wire and a meshed steel wire. If choosing a meshed steel wire, a
retaining spring is in need.
If necessary, you may screw loose the damping nut on the throttle lever slightly when controlling the throttle by
a remote-controlled steel wire
To Next Page
Loading...
Need help?
General
