Life Fitness FLEXSTRIDER User Manual (English)

Questions and Answers:

S
susancolemanAug 13, 2025
What to do if my Life Fitness FLEXSTRIDER has no power?
- S
  Samuel RobbinsAug 14, 2025
  If your Life Fitness Treadmill isn't getting power, there are several things to check: * Ensure the ON/OFF switch is in the ON position. * Verify the treadmill is plugged into a dedicated 20 amp circuit and check the outlet with a voltmeter; reset the circuit breaker if necessary. * Inspect the power connection at both the wall outlet and the machine. * If the line cord is damaged, contact Life Fitness Customer Support Services to replace it. * If the treadmill has been inactive for 5 minutes, it may be in Energy Saving Mode. Step on the belt to wake up the console. It takes approximately 50 seconds after stepping onto the belt.
J
Jocelyn FloresAug 17, 2025
What to do if display does not illuminate when Life Fitness Treadmill is powered on?
- D
  dominique36Aug 17, 2025
  If the display on your Life Fitness Treadmill does not illuminate when powered on, check all electrical connections for proper attachment at the display console or motor control board. Contact Life Fitness Customer Support Services.
J
Joan WeaverAug 20, 2025
Why is my Life Fitness FLEXSTRIDER maximum speed reduced?
- N
  Nicole PhillipsAug 21, 2025
  The maximum speed of your Life Fitness treadmill might be reduced due to several reasons: * Avoid pushing the striding belt in either direction. * Ensure the treadmill is plugged into a dedicated 20 amp circuit. * If the striding belt/deck malfunctions, contact Life Fitness Customer Support Services to replace the belt and deck.
H
Holly DeanAug 29, 2025
What to do if heart rate readings are abnormally elevated on Life Fitness FLEXSTRIDER Treadmill?
- T
  Tina WebbAug 29, 2025
  If heart rate readings on your Life Fitness Treadmill are abnormally elevated, it may be due to electromagnetic interference. Move the product a few inches away from the probable cause (such as TVs, cell phones, computers, cars, high voltage power lines, or another heart rate transmitter), or move the probable cause a few inches away from the product, until the heart rate readings are accurate.
B
Belinda JacksonSep 1, 2025
What to do if my Life Fitness Treadmill striding belt slips off-center?
- M
  Michael OrtegaSep 1, 2025
  If the striding belt on your Life Fitness treadmill slips off-center, check the levelers and level the treadmill. Also, check the striding belt and re-tension it as necessary. Refer to Elevation Series 95T Treadmill Assembly Instructions.
M
Mary SummersSep 5, 2025
What to do if rubbing sound comes from underneath my Life Fitness Treadmill?
- C
  Christine PalmerSep 5, 2025
  If you hear a rubbing sound from underneath your Life Fitness treadmill, inspect underneath the striding belt and the machine itself. Remove any debris or objects that may be causing interference.
S
Sarah JonesSep 8, 2025
What to do if heart rate reading is lost on Life Fitness FLEXSTRIDER Treadmill?
- S
  stacyoliverSep 8, 2025
  If the heart rate reading on your Life Fitness Treadmill is initially detected but then lost, it may be due to interference from personal electronic devices (like cell phones and MP3 players) or other sources of noise. Remove the source of noise or reposition the exercise equipment.