Do you have a question about the Life Fitness T5i and is the answer not in the manual?
Running Surface | 20" x 60" |
---|---|
Max Speed | 12 mph |
Incline Range | 0% to 15% |
Weight Capacity | 350 lbs |
Foldable | No |
Motor | 3.0 HP |
Display Type | LCD |
Heart Rate Monitoring | Contact and wireless telemetry |
Troubleshooting steps for when the treadmill does not power on.
Diagnosing and resolving issues with the treadmill's incline system.
Interpreting and resolving specific error codes displayed on the console.
Addressing issues with belt movement, tracking, speed, and slippage.
Troubleshooting random resets, pauses, and unresponsive keypad buttons.
Identifying and resolving unusual noises such as knocking, rubbing, or groaning.
Troubleshooting issues related to continuous heart rate display and chest strap detection.
Visual guide to the display console layouts for T3/T5 and T3i/T5i/T7i models.
Instructions on how to access, navigate, and exit diagnostic modes.
Accessing and viewing software version information for console and motor controller.
Performing a display test to check LEDs and segments.
Testing the functionality of each key on the console keypad.
Testing the drive and incline motors and motor controller power usage.
Viewing accumulated workout statistics for different programs and users.
Activating a mode for console display photography without changes.
Step-by-step guide for replacing the striding belt and deck assembly.
Procedure for adjusting the striding belt to ensure proper centering.
Instructions for properly tensioning the striding belt.
Guide for removing and installing the motor drive belt.
Step-by-step instructions for replacing the treadmill's drive motor.
Procedure for removing and installing the front roller assembly.
Guide for removing and installing the rear roller assembly.
Instructions for replacing the lifespring shock absorbers.
Step-by-step guide for replacing the treadmill's lift motor.
Procedure for removing and installing the motor controller PCB.
Instructions for replacing the unit's leveling components.
Guide for removing and installing the console display board.
Procedure for replacing the telemetry receiver and heart rate cable.
Instructions for removing and installing the main wire harness.
Guide for replacing the console membrane switch and buttons.
Procedure for removing and installing the console overlay assembly.
Instructions for replacing the handrails and crossbar components.
Overview of the T3i/T5i/T7i console electronics and connectors.
Overview of the T3/T5 console electronics and connectors.
Detailed overview of the motor controller PCB components and functions.
Schematic showing the overall electronic connections and components.
Schedule and guidelines for regular treadmill maintenance.
Steps for safely unpacking the treadmill from its shipping container.
Important safety and general instructions for treadmill installation.
List and illustration of parts and tools required for treadmill assembly.
Final checks to ensure proper assembly and readiness before operating.
Information on how to contact customer support for orders and troubleshooting.