Life GENIUS GE 2 User Manual

GENIUS
Centrale di comando per cancelli a due ante
Control unit for two-leaf gates
Steuerung für Zweiflügeltore
Istruzioni e avvertenze per l’installazione, l’uso e la manutenzione
Instructions and indications for installation, use and maintenance
Anleitungen und Hinweise für Installation, Gebrauch und Wartung
Vers. 2.0-11/2004
GE 2
MANUALE DESTINATO ESCLUSIVAMENTE ALL’INSTALLATORE PROFESSIONALE.
L’installazione deve essere effettuata solo da un installatore professionale qualificato in conformità
alla legge 46/90.
MANUAL DESTINED TO PROFESSIONAL FITTERS ONLY
Under law 46/90, installation may only be performed by professional fitters.
HANDBUCH NUR FÜR DEN FACHINSTALLATEUR
Die Installation darf nur von einem laut Gesetz 46/90 qualifizierten Fachinstallateur durchgeführt
werden.

Life GENIUS GE 2 Specifications

General

Brand	Life
Model	GENIUS GE 2
Category	Control Unit
Language	English

Summary

Intended Use

Advanced Adjustments and Settings

Keyboard Programming

Safety Instructions and Warnings

General Instructions and Warnings

Essential safety guidelines for installation, use, and maintenance of the gate automation.

Installation

Installation Instructions and Warnings

Detailed safety instructions and procedures for installing the gate automation system.

Preliminary Checks

GEBOX Installation Container

Wiring and Connections

Electrical System Preparation and Mains Connection

Introducing Electric Wires into the GEBOX

Control Unit Connections

Wiring Diagram of Line, Lights, Motors and Various Devices

Description of Line, Motor and Light Connections (230 VAC Power Supply)

Description of the Connection of the Devices

Connecting Photocell

Wiring Diagram for Connections on the Lower Part of the Control Unit

Starting Up and Initial Checks

Description of the Keyboard

Initial Adjustments and Programming

Direction of Movement Identification

Travel and Leaf Staggering Identification

Identifying the Speed

Measuring and Adjusting the Force

Radio Control Identification

Total Erasure of Radio Receiver Memory

Testing and Trial Run

Testing

Detailed procedures for testing the gate automation system and its safety features.

Testing the Control Unit

Performing tests on the control unit's various operating modes and functions.

First Usage

Dead Man Mode

Automatic Mode

Phototest Selector

Photo 1 Selector

Close After Photo Selector

Progressive Functions

Force Function

Pause Time Function

Courtesy Light Function

Deceleration in Closing Function

Deceleration in Opening Function

Obstacle Detection Function

Pedestrian Opening Function

Diagnostics

Malfunctions Indicated by the Control Unit

How the control unit signals faults using LEDs and the flashing light.

Replacing the Frontal Fuse

Instructions and Indications for Use and Maintenance

Safety Instructions and Warnings

Crucial safety instructions for operating and maintaining the gate automation.

Indications and Warnings for Use

Guidelines for the safe and correct use of the gate automation system.

Using the Automation

Functions Set on the Radio Control

Functions Set on the Key Selector

Automation Malfunction

Operator Release

Maintenance

Maintenance Instructions and Warnings