Life hd:basic User Manual

6
1.0 HARDWARE SETUP
•Makesurethatyour3.5”SATAdrivehasthe
jumper set on “Master” mode.
•Releasethescrewsonthehddenclosure
with the provided screw driver.
•Insertyour3.5”SATAdriveandreattach
the screws.
•ConnecttheUSBcabletothehdd
enclosure and to the computer.
 Connectthepoweradaptertothehdd
enclosure and to the power outlet.
•Turnonthepower.
•Yourcomputershouldnowdetectthedrive.
 ForWindows2000/XP/VISTA/7
and Mac OS X no driver setup is necessary.
Note:
Before unplugging the drive from your
computer, always stop the hardware from the
systemtray.Ifyoudirectlypulloutthecable
without using the STOP operation, it may
cause data loss or hardware damage.

Life hd:basic Specifications

General

Brand	Life
Model	hd:basic
Category	Enclosure
Language	English