Lifebreath 200MAX User Manual

®
CLEAN • FRESH • AIR
* LEAVE FOR HOMEOWNER
NOTE: Due to ongoing research and product development, specifications,
ratings and dimensions are subject to change without notice.
TI-84R-NE
0202
Installing Contractor
Telephone / Contact
Serial Number
Installation Date Model
TO BE COMPLETED BY CONTRACTOR AFTER INSTALLATION
OPERATION AND
INSTALLATION MANUAL
Contains
ControlAir 15
For Models:
95MAX
155MAX
200MAX
MAXTOP
195DCS
300DCS
200ERV
200ERVD
CAUTION
Before installation, careful consideration must be given to
how this system will operate if connected to any other piece
of mechanical equipment, i.e. a forced air furnace or air
handler, operating at a higher static. After installation, the
compatibility of the two pieces of equipment must be
confirmed by measuring the airflow’s of the Heat Recovery
Ventilator (HRV) or Energy Recovery Ventilator (ERV) by
using the balancing procedure found in this manual.
It is always important to assess how the operation of any
HRV/ERV may interact with vented combustion equipment
(ie. Gas Furnaces, Oil Furnaces, Wood Stoves, etc.).
NEVER install a ventilator in a situation where its normal
operation, lack of operation or partial failure may result
in the backdrafting or improper functioning of vented
combustion equipment!!!
IMPORTANT - PLEASE READ THIS
MANUAL BEFORE INSTALLING UNIT

Lifebreath 200MAX Specifications

General

Brand	Lifebreath
Model	200MAX
Category	Fan
Language	English

Summary

Introduction to Lifebreath HRVs and ERVs

HRV Aluminum Core Explained

Explains the function and heat transfer of an HRV's aluminum core.

ERV Enthalpic Paper Core Explained

Explains the function and heat/moisture transfer of an ERV's enthalpic core.

Warranty Information

ERV Questions and Answers

HRV vs. ERV Differences

Compares Heat Recovery Ventilators (HRVs) and Energy Recovery Ventilators (ERVs).

Enthalpy Definition

Defines enthalpy and its significance in air transfer for ventilation units.

ERV vs. HRV Climate Suitability

Discusses when to use an ERV over an HRV based on climate conditions.

ERV Summer Cooling Benefits

Explains ERV moisture transfer benefits during summer cooling seasons.

Core Maintenance Procedures

Details how to clean and maintain the unit's heat/energy recovery core.

Air Filter Requirements

Explains the importance and necessity of using air filters with the unit.

Climate Matching Guide for HRV/ERV Selection

Severe Conditions Recommendations

Recommends HRV for severe climate conditions based on the provided map.

Moderate Conditions Recommendations

Recommends HRV for moderate climate conditions based on the provided map.

Pacific Conditions Recommendations

Recommends HRV or optional ERV for Pacific climate conditions.

Arid Zone - Dry Climate Recommendations

Recommends HRV for arid climate zones based on the provided map.

Extreme Area - High Humidity Recommendations

Recommends ERV for high humidity extreme climate areas.

Lifebreath 95MAX Specifications

95MAX Engineering Data

Technical details including core, motors, filters, defrost, and case construction.

95MAX Performance Metrics

Details airflow, temperature recovery, and efficiency ratings for the 95MAX.

95MAX Optional Accessories

Lists optional accessories and controls compatible with the 95MAX model.

Lifebreath 155MAX Specifications

155MAX Engineering Data

Technical details including core, motors, filters, defrost, and case construction.

155MAX Performance Metrics

Details airflow, temperature recovery, and efficiency ratings for the 155MAX.

155MAX Optional Accessories

Lists optional accessories and controls compatible with the 155MAX model.

Lifebreath 200MAX Specifications

200MAX Engineering Data

Technical details including core, motors, filters, defrost, and case construction.

200MAX Performance Metrics

Details airflow, temperature recovery, and efficiency ratings for the 200MAX.

200MAX Optional Accessories

Lists optional accessories and controls compatible with the 200MAX model.

Lifebreath MAXTOP Specifications

MAXTOP Engineering Data

Technical details including core, motors, filters, defrost, and case construction.

MAXTOP Performance Metrics

Details airflow, temperature recovery, and efficiency ratings for the MAXTOP.

MAXTOP Optional Accessories

Lists optional accessories and controls compatible with the MAXTOP model.

Lifebreath 195DCS Specifications

195DCS Engineering Data

Technical details including core, motors, filters, defrost, and case construction.

195DCS Performance Metrics

Details airflow, temperature recovery, and efficiency ratings for the 195DCS.

195DCS Optional Accessories

Lists optional accessories and controls compatible with the 195DCS model.

Lifebreath 300DCS Specifications

300DCS Engineering Data

Technical details including core, motors, filters, defrost, and case construction.

300DCS Performance Metrics

Details airflow, temperature recovery, and efficiency ratings for the 300DCS.

300DCS Optional Accessories

Lists optional accessories and controls compatible with the 300DCS model.

Lifebreath 200ERV Specifications

200ERV Engineering Data

Technical details including core, motors, filters, defrost, and case construction.

200ERV Performance Metrics

Details airflow, temperature recovery, and efficiency ratings for the 200ERV.

200ERV Optional Accessories

Lists optional accessories and controls compatible with the 200ERV model.

Lifebreath 200ERVD Specifications

200ERVD Engineering Data

Technical details including core, motors, filters, defrost, and case construction.

200ERVD Performance Metrics

Details airflow, temperature recovery, and efficiency ratings for the 200ERVD.

200ERVD Optional Accessories

Lists optional accessories and controls compatible with the 200ERVD model.

Function and Control of ControlAir 15

ControlAir 15 Operation Overview

Explains how to operate the ControlAir 15 unit and its basic functions.

ControlAir 15 Self-Test Function

Describes the automatic self-test procedure initiated upon power-up.

Automatic Defrost System

Details the automatic defrost system, its operation, and indicators.

Glossary of Control Terms

Defines key terms related to unit controls like Dehumidistat and Thermistor.

ControlAir 15 Modes and Speed Selection

ControlAir 15 Operating Modes

Explains different operating modes (OFF, Standby/On, 20 On/40 Off) and LED indicators.

ControlAir 15 Speed Selection

Describes how to adjust the fan speed using the Control Pad.

Automatic Defrost LED Indicator

Explains the LED indicator for the automatic defrost function.

ControlAir 15 Optional Remote Controls

Programmable Ventilation Controller (PVC)

Details the PVC controller with timer, dehumidistat, and Air Sentry features.

Air Sentry Air Quality Sensor

Describes the Air Sentry monitor for detecting air quality issues.

Ventilation Dehumidistat Control

Explains the Dehumidistat for controlling home humidity levels.

Digital Electronic Timer (DET)

Outlines the features and installation of the digital electronic timer control.

Using the Dehumidistat for Humidity Control

Dehumidistat Operation and Override

Explains how the dehumidistat controls humidity and overrides fan speed.

Setting the Dehumidistat

Provides guidance on setting the dehumidistat for comfort and seasonal use.

95 MAX Dimensions and Airflow

95 MAX Port Specifications and Conversion

Details the port specifications and conversion for the 95 MAX model.

Variable Port Location for 95 MAX

Explains installer options for positioning the INDOOR EXHAUST port.

95 MAX Airflow Path Description

Describes how air flows through the 95 MAX unit for efficient heat exchange.

HRV/ERV Installation Guide

Selecting the Unit Location

Provides guidance on selecting an optimal and accessible location for the HRV/ERV.

Connecting Prohibited Appliances

Lists appliances that should NOT be connected to the HRV/ERV to avoid damage.

Installing the Drain Line and P-Trap

Details the installation of the condensate drain line and P-trap.

Installing Air Ducts and Ducting

Outside Weatherhood Installation

Describes the fixed covered hoods with bird screens for air intake and exhaust.

Locating Intake and Exhaust Weatherhoods

Provides guidelines for positioning intake and exhaust weatherhoods.

Ducting from Weatherhoods to HRV/ERV

Explains how to connect flexible insulated ducting from weatherhoods to the unit.

Warmside Ducting Best Practices

Offers recommendations for short, efficient duct runs and joint sealing.

Supply Air and Exhaust Ducting

Supply Air Ducting Guidelines

Guides on supplying fresh air to different areas of the home.

Stale Air Exhaust System Setup

Details how to exhaust stale air from key areas like bathrooms and kitchens.

Dampers and Grilles for Airflow

Discusses the use of balancing dampers and grilles for optimal air distribution.

HRV/ERV Installation Diagrams

Partially Dedicated System Diagram

Illustrates a system drawing stale air from key areas and supplying fresh air to the furnace return.

Direct Furnace Connection Diagram

Shows connecting supply air to the furnace cold air return.

Simplified Installation - Return/Return Method

Return/Return System Configuration

Illustrates connecting both supply and exhaust streams to the furnace cold air return.

Simplified Installation - Supply/Return Method

Supply/Return System Configuration

Illustrates connecting streams to furnace cold air return and supply air side.

Fully Dedicated System Installation

Dedicated System Configuration

Shows stale air drawn from key areas, fresh air supplied to main living areas.

Pitot Tube Air Flow Balancing Procedures

Pre-Balancing Checks and Requirements

Lists essential checks and requirements before performing airflow balancing.

Balancing Procedure with Pitot Tube

Details the step-by-step process for balancing airflow using a Pitot tube.

Balancing Collar Installation Instructions

HRV Maintenance Routine

Inspect Exterior Hoods

Check hoods monthly for blockages like leaves, grass, or snow.

Clean HRV Air Filters

Instructions for cleaning washable air filters twice a year.

Clean HRV Heat Recovery Core

Guide for cleaning the core twice a year using warm soapy water.

Maintain HRV Drain Line and P-Trap

Annual cleaning of the drain line and P-trap to prevent blockages.

Clean HRV Duct Work and Fans

Recommends annual duct cleaning and fan cleaning due to potential dust.

ERV Maintenance Routine

Inspect Exterior Hoods

Check hoods monthly for blockages like leaves, grass, or dirt.

Clean ERV Air Filters

Instructions for cleaning washable air filters four times a year.

Clean ERV Enthalpic Core

Guide for cleaning the core twice a year by vacuuming; do not wash.

Clean ERV Duct Work and Fans

Recommends annual duct cleaning and fan cleaning due to potential dust.

Troubleshooting Your HRV/ERV System

Troubleshooting Poor Air Flows

Addresses issues like plugged filters, obstructed cores, and unbalanced airflow.

Troubleshooting Cold Supply Air

Solutions for cold supply air, including grille placement and tempering.

Troubleshooting Dehumidistat Issues

Troubleshoots problems with the dehumidistat not operating correctly.

Troubleshooting High Humidity Levels

Solutions for high humidity, including undersized units and occupant lifestyle.

Troubleshooting Low Humidity Levels

Addresses low humidity and suggests using humidifiers.

Troubleshooting Frosting and Ice Build-up

Solutions for HRV/ERV or duct frosting and ice build-up.

Troubleshooting Water in Unit Bottom

Troubleshoots water accumulation due to drain issues or improper installation.

Technical Bulletin: ControlAir 15 Wiring

Preventing Condenser Initialization

Wiring configuration to prevent ControlAir 15 from initializing the outdoor cooling condenser.

Residential Wiring Diagrams

Micro Processor Board Wiring Details

Details the wiring connections for the main control board.

Fan Motor Wiring Diagram

Wiring diagram for the fan motor connections and capacitor.

Defrost and Auto-Transformer Wiring

Wiring details for the defrost system and auto-transformer.