LifeSource UA-767T User Manual

~ WHAT DISPLAY SYMBOLS MEAN
Display
Condition/ Recommended
Symbol
Cause Action
~
Appears during measure- Remain still and refrain
ment; blinks
and beeps from talking; measure-
MEASUREMENT IN
when pulse is detected. ment in progress.
PROGRESS
00
Battery voltage is
Replace all batteries
too low for monitor with
new ones.
LOW BATTERY
to work properly.
r
Appears when systolic
Check
for air leakage; make
,- ,- ,-
and diastolic measure- sure cuff tube is properly
-
ments are within 10 connected to monitor
1
mmHg of each other.
and exhaust rate is in
ERROR 1
increments of between
2 mmHg.
and 5 mmHg
r
Appears if pressure Try measurement again
,- ,- ,-
- 2
value is unstable due
and remain very still.
to movement during
ERROR 2
reading.
r
Appears when pressure
Make sure cuff tube is
,-rr
value did not increase properly connected to
-
3
during cuff inflation:
monitor, cuff is securely
ERROR 3
1) cuffis not fastened fastened and exhaust rate
2) air connector is back- is between 2
mmHg and
wards or not connected
5 mmHg. Make sure air
properly.
connector is inserted
NOTE: If you hear an announcement
properly into tube
indicating that a measurement error
and monitor.
has occurred, take the corrective
MONITOR - ~ - CUFF HOSE
actions shown above and re-measure.
3
0
LifeSource Health Line (Toll-Free): 1-888-726-9966

LifeSource UA-767T Specifications

General

Brand	LifeSource
Model	UA-767T
Category	Blood Pressure Monitor
Language	English