What to do if my LifeSource UB-521 Blood Pressure Monitor cuff does not inflate?
If the cuff on your LifeSource Blood Pressure Monitor isn't inflating, it might be due to low battery voltage, which may be indicated by a blinking low battery symbol. Replace all batteries with new alkaline batteries.
Why LifeSource UB-521 readings are too high or too low?
Inaccurate readings on your LifeSource Blood Pressure Monitor can occur if the cuff isn't fastened correctly, so ensure it is properly secured. Movement during measurement can also affect readings, so remain still and quiet. Lastly, the cuff should be at heart level while you are sitting comfortably.
How to fix LifeSource UB-521 Blood Pressure Monitor when nothing appears on the display?
If nothing appears on the display of your LifeSource Blood Pressure Monitor, even when powered on, it could be due to drained batteries. Replace all batteries with new alkaline batteries. Also, ensure the battery terminals are correctly positioned, matching the positive and negative markings in the battery compartment.
General advice and warnings for using the blood pressure monitor, including safety and care instructions.
Instructions for installing batteries and preparing the device for initial use.
Explanation of the cuff inflation meter's function and display during measurements.
Details the pressure rating indicator for blood pressure classification based on JNC7.
General| Measurement Method | Oscillometric |
|---|---|
| Display Type | Digital LCD |
| Measurement Range (Pressure) | 0 - 299 mmHg |
| Accuracy (Pressure) | ±3 mmHg |
| Memory Capacity | 60 readings |
| Cuff Size | 22-32 cm |
| Irregular Heartbeat Detection | Yes |
| WHO Blood Pressure Classification Indicator | Yes |
| Measurement Range (Pulse) | 40 to 180 beats/minute |
| Accuracy (Pulse) | ±5% |
| Power Source | 4 x AA batteries |
To Next Page