LifeSpan Unity User Manual

12
Assembly Instructions
Step 1: Attach Base Foot to Seat Slide Frame
A. Position Seat Slide Frame (1) on oor as shown in gure 1.
B. Remove the two pre-installed M8X15L Bolts, Lock Washers and Washers
(12) from Seat Slide Frame.
C. Connect the Rear Base Foot (2) to the Seat Slide Frame (1) with the two
M8x15L Bolts, Lock Washers and Washers (12).
5mm Allen
Wrench w/
Phillips
1
12
2
PRE-INSTALLED
M8 x 15L Bolt
(x2)

LifeSpan Unity Specifications

General

Brand	LifeSpan
Model	Unity
Category	Indoor Furnishing
Language	English