BEFORE BEGINNING ASSEMBLY
Identify and inventory all parts using the checklist boxes on the Parts List. Keep the
hardware bags and their contents separate. If any parts are missing, call our Customer
Service Department.
PARTS LIST
AA 1009266 16” Pegboard Strip 2
Pegboard Hardware Bag [1011398] 1
PA BS05800 #10 x 3/4” Pan Head Screw 11
Tool Clip Assortment [HH12500]* 1
GA BA06500 Pegboard J-Hook 3
GB BA06600 Pegboard L-Hook 3
GC BA06700 Pegboard Toolholder 2
GD BA06800 Pegboard 2” Double Arm Hook 1
GE BA06900 Pegboard 4’ Double Arm Hook 1
PA
AA
Pegboard Installation
1
Use a Level, and position both 16” Pegboard Strips (AA)
in the desired locations. Screw the Pegboards to the wall
using #10 x 3/4” screws (PA). See Note.
1a
PA (10)
PA
The Pegboard Strips are
screwed directly into the
plastic. Line up Strip anywhere
on wall so that holes are over
plastic (and not over a groove in
the wall).
Be sure that the Pegboard Strip is
level before inserting screws.
* Hang the Tool Hooks on the Pegboard
Strips after they are installed.
To Previous Page
Loading...
Need help?
General
