Lifetime 1533 - Page 12

12
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ALH
!,&
ADS
Align the hole in the Top Pole (ALH) with the slot in the -IDDLE0OLE!,& and
slide the Top Pole over the Middle Pole. Insert a vXv3CREW!$3
through the small hole in the Top Pole and into the slot in the Middle Pole
as shown.
Note: The 1/4” x 3/4” Screw should be fl ush with the Pole, but
will spin freely once installed. Do not jam the Poles together
until instructed.
!
SEC
1.1
ADS (x1)
ALH
!,&
7ARNING
3TICKER
CIH
CIH (x1)