Lifetime 60054 - Hinge & Table Top Assembly Attachment; Attach Adjustment Lever; Mount Assembly onto Legs

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
15
SEC
SEC
2.6
SEC
2.7
3LIDEANAdjustment Lever (CTQ)OVERTHEENDOFTHE-ETAL4UBEANDALIGNTHEHOLESINTHE!DJUSTMENT,EVERWITHTHOSE
INTHEENDOFTHE-ETAL4UBE4HENINSERTTWO#8 x 7/8” Button-Head Screws (CTM)THROUGHTHEHOLESINTHE-ETAL
4UBEANDTHE!DJUSTMENT,EVERASSHOWN3ECUREWITHTWO#8 Nylock Nuts (CTL). Repeat sections 2.1 - 2.5 for the
other end of the Metal Tube.
CTLX
CTMX
CTM
CTM
3ETTHE!SSEMBLYONTOTHE,EGSWITHTHE!DJUSTMENT0LATESONTHEOUTSIDEOFTHE,EGSANDALIGNTHEHOLESATTHE
TOPOFTHE,EGSWITHTHEHOLESANDGROOVESINTHE0LATESASSHOWN
CTQ
CTL
CTL
2
Align these holes
Align these holes and
grooves
Set Adjustment Fork into the nook on the
Legs as shown.
8 mm
CTQX
.OTTO3CALE