Lifetime 60054 - Leg & Bench Assembly Steps; Attach Right Leg to Cross Support; Attach Left Leg to Cross Support

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
8
SEC
CRJ
CSI
CSI
AONX
SEC
1.1
Lifetime Logo is on
bottom
,AYTHE Right Leg (CRJ)mATONTHEGROUNDASSHOWN)NSERTTWOM6 x 1 x 47 mm Hex-Head Bolts (CSI)THROUGHTHE
HOLESATTHEFRONTOFTHE2IGHT,EGASSHOWN
1
CSIX
AON
AON
CRL
Lifetime Logo faces outward
as shown
SEC
1.2
0LACETHEHOLESONTHEENDOFTHECross Support (CRL)OVERTHETWO(EX"OLTSYOUJUSTINSERTEDINTHEPREVIOUSSTEP
3ECURETHE#ROSS3UPPORTUSINGTWOM6 x 1 Cap Nuts (AON)ASSHOWNTighten Nuts securely, but do not overtighten.
47 mm
10 mm (x2)
WARNING
$ONOTOVERTIGHTENTHE#AP.UT)FTHEENDOF
THE"OLTBREAKSTHROUGHTHEPLASTICCAPCALLOUR
#USTOMER3ERVICE$EPARTMENT%XPOSEDTHREADS
ONTHEENDOFTHE"OLTMAYCAUSESERIOUSINJURIES