Lifetime 60054 - Leg & Bench Assembly Continued; Connect Left Leg to Cross Support; Attach Bench Assembly to Legs

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
9
SEC
3ETDOWNTHE!SSEMBLYASSHOWN7HILEANOTHERADULTHOLDSTHE!SSEMBLYINPLACECONNECTTHELeft Leg (CRI) to
THE#ROSS3UPPORTUSINGTHEREQUIREDHARDWARETighten Nuts securely, but do not overtighten.
**TWO ADULTS REQUIRED FOR THIS STEP**
SEC
1.3
SEC
1.4
3ETABench Assembly (CRK)DOWNONTOTHE,EGSWITHTHEHOLESINTHECROSSBARSTOWARDTHEFRONTASSHOWN5SETHE
LOCATIONNUBTOALIGNTHEHOLESINTHECROSSBARSWITHTHOSEINTHE,EGS
Align these holes.
Location Nub
Cross Bar
1
CSI
CRI
CRK
AON
AON
CSI
AONX
CSIX
47 mm
10 mm (x2)
WARNING
$ONOTOVERTIGHTENTHE#AP.UT