Lifetime 90160 - Attaching Backboard to Rim Components

29
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Insert the v5"OLT!/5 through the upper part of the opening on the
BACKSIDEOFTHE"ACKBOARD!*) as shown.
SEC

Connect the 2IM!,8 and Plastic Guard (ALD) to the "ACKBOARD!*) with the
hardware shown. Thread the v*AM.UTS!!6 all the way down on the
v5"OLT!/5. /NTHEUNDERSIDEOFTHE"ACKBOARDPLACE.38” x 1” Steel
Spacers (ACS) onto the 5/16” x 2 1/2” Tap Bolts (ABG), and secure the 5/16”
.YLOCK&LANGE.UTS!"+ONTOTHE4AP"OLTS
SEC
3.5
1/2”
ACSX
ABKX
AAVX
!*)
AOU
ABK
Underside View
ABK
ACS
ALD
AAV
AAV
!,8
!*)
ABG