Lifetime 90240 - Page 12

18
TOOLS AND HARDWARE REQUIRED
X SECTION 2 (CONTINUED)
DZR (x2)
• Attach the Pendulums (DZQ) to the Trapeze Swing Bar (CRR) using the hardware indicated.
2.1
1/2 in/po (≈13 mm)
AAN (x2)
DZQ (x2)
(2)
AAN
AAN
DZQ
DZQ
DZR
DZR
CRR
2.2
• Attach the End Cap (CSD) to the Trapeze Swing Bar (CRR). Secure the End Cap with two (2) Cap Plugs (ARO).
CSD
ARO
ARO
CRR
ARO (x2)
3/16 in/po (≈5 mm)
(2)