Lifetime 90240 - Page 8

14
TOOLS AND HARDWARE REQUIRED
X SECTION 1 (CONTINUED)
DZR (x6)
• Attach the Pendulums (DZQ) to the Swing Bar (CB0) using the hardware indicated. Do this for each set of brackets
on the Swing Bar.
1.1
AAN
DZR
DZQ
CBO
1/2 in/po (≈13 mm)
AAN (x6)
DZQ (x6)
(2)
3/16 in/po (≈5 mm)
(2)