Lifetime 90269 - POLE ASSEMBLY STEPS; Prepare Top Pole (Step 1.1); Connect and Secure Pole Sections (Steps 1.2, 1.3)

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
9
SEC
ALF
ALH
1
2
Remove Plastic
#BDL
'SPOU
#BDL
'SPOU
ACN
ACL
ALH
ALF
SEC
1.2
SEC
1.3
SEC
1.1
ADSY
%P/PU3FNPWFUIFTop Pole (ALH)GSPNJOTJEFUIFMiddle Pole (ALF)3FNPWFUIFQMBTUJDGSPNUIF5PQ1PMF
Note: Insert the Screw. until the Screw Head is flush with
the Pole. The Screw will spin freely once completely
inserted.
!
ADS
Note: The Knob (ACN) will face the back of the system.
!
ACLY
1
Note: If needed, reinsert the Top Pole into the Middle
Pole by sliding the Top Pole up through the bottom of the
Middle Pole.
!
ACNY