LEGO PICKUP TRUCK 10290 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 18
12
Legend
DISCONNECT
CONNECT /
RECONNECT
TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
The interior
light will activate
when the driver
door is opened and
deactivate when
the door is closed.
If you experience
problems with the
light deactivating,
reposition the NC
Push Board further
out so that the
trigger is pushed
in when the door is
closed.
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
To Next Page
Loading...
