Basics:
The FORGE 192 is a classic DMX controller with 192 channels. The 192 channels are divided into
12 "scanners" with 16 channels each. The user has 30 banks with 8 memory locations each for
scenes as well as 6 freely programmable chasers at his disposal. The programmed scenes and
chasers can be played both in auto and sound mode.
2: Scene buttons
Press the button to select the scene.
3: Channel fader
Use the faders to set the individual values of the channels from 0-255 or 0%-100%.
4: Page key
Use this button to switch between pages A and B. Side A contains channels 1-8, side B channels
9-16.
5: Speed fader
This fader controls the speed of each scene or step from 0.1 sec to 10 min per scene or step.
6: Fade Time Fader
This controls the fade time from one scene or step to another with a value of 0-30 sec.
To Next Page
Loading...
Need help?
General