Need help?Do you have a question about the Lightmaxx Led Nano PAR and is the answer not in the manual?
General| Brand | Lightmaxx |
|---|---|
| Model | Led Nano PAR |
| Category | Lighting Equipment |
| Language | English |
The housing must not be removed. Internal components carry high voltage, posing an electric shock risk.
Modifications to power cord/plug are prohibited. Damaged cords must be replaced by manufacturer spares to prevent fire/death.
Keep packaging away from children due to suffocation risk. Children must not use the appliance unattended.
A direct view into the light source must be avoided to prevent potential eye injuries.
Stroboscopic effects can trigger seizures. Warn sensitive individuals and keep them away from the device.
Check for damage before use. Mount upright or suspended using solid attachment points and a safety cable.
Improper installation poses injury risk. Installation must be by experienced personnel following safety regulations.
Connect DMX input to controller/software. Use 110 Ohm DMX cables and address the device according to your DMX setup.
Defines functions for Channel 1: No function, Static Colours, Colour Jump, Colour Fade, Sound Flash, and Strobe.
Details Channel 2 functions including Colour Chase, specific colour selections, and colour combinations.
Navigate the menu using 'Mode' to activate, 'Up'/'Down' for selection, and 'Enter' to confirm.
Set DMX address 001-512. Address 001 enables SLAVE mode. IP settings affect start address calculation.
Details include model, output, DMX channel, power, light source, irradiance, beam angle, dimensions, and weight.
To Next Page
