Lightmaxx Vega Wash User Manual

Important safety instructions! Please read before connection!
DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device.
Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective
devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact your
dealer. In the case of a malfunction of the device, operation must also be stopped
immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged, it
must be replaced immediately with an original spare part from the manufacturer. Failure
to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out
of the reach of babies and children due to the risk of suffocation.
Ensure that children never use the appliance unattended! In addition, make sure that
children do not remove (small) parts from the device, as they could suffocate by swallowing
parts!
WARNING! (High light intensity - eye injuries)
A direct view into the light source is absolutely to be omitted!
WARNING! (Epilepsy)
Stroboscopic effects (flashes of light) can trigger seizures of epilepsy in some people.
Accordingly sensitive people should be warned and should not be in the vicinity of such
devices.
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a well-ventilated location away from direct heat sources,
naked flames, combustible materials, and liquids. A minimum distance of 1 m is required.
Do not tape or cover the ventilation slots of the unit.

Lightmaxx Vega Wash Specifications

General

Beam Angle	4° - 60° (Zoomable)
Pan	540°
Tilt	270°
Power Supply	AC100-240V, 50/60Hz
Control Protocol	DMX512
Voltage	AC100-240V, 50/60Hz
Protection Rating	IP20
Type	Wash Light
Control	DMX512, Master/Slave
LED Type	RGBW
Operating Modes	DMX, Auto, Sound, Master/Slave
Cooling System	Fan Cooled

Summary

Important Safety Instructions

Electrical Shock Hazard - High Voltages

Warns about high voltages within the device and the necessity of professional repair.

Short Circuit Hazard - Power Cord

Prohibits power cord modifications and mandates manufacturer-approved replacements for damaged cords.

Suffocation Risk for Babies and Children

Advises proper disposal of packaging and keeping small parts away from children.

Eye Injury Risk from High Light Intensity

Strongly warns against looking directly into the light source to prevent eye damage.

Epilepsy Risk from Stroboscopic Effects

Alerts sensitive individuals to potential seizures triggered by flashing light effects.

Overheating and Fire Hazard

Specifies maximum ambient temperature and ventilation requirements to prevent overheating.

Device Symbols and Installation

Safe Installation Procedures

Covers checking for damage, using packaging, secure mounting, and safety backups.

Risk of Injury from Falling

Warns that improper installation can cause injury and damage, requiring experienced personnel.

Setup and DMX Connectivity

Pre-Operation Setup

DMX Operating Mode

DMX Channel Mode Functions

4 Channel Mode

8 Channel Mode

Menu Navigation and Settings

Menu Navigation

Menu Structure

Technical Specifications

Vega Wash Specifications

Comprehensive list of technical details including power, LEDs, beam angle, DMX, connections, dimensions, and weight.

Troubleshooting and Cleaning

Troubleshooting Common Issues

Provides solutions for problems like no function, DMX reaction, or remote mode issues.

Cleaning and Maintenance