What to do if Lightmaxx Vector Haze 1.0 has no reaction in DMX mode?
If your Lightmaxx DJ Equipment isn't responding in DMX mode, first check the cable connections. If the issue persists, verify your DMX address settings. As a further step, try using an alternative DMX controller, if available.
What to do if Lightmaxx DJ Equipment has no reaction from remote control?
If your Lightmaxx DJ Equipment isn't responding to the remote control, start by changing the battery in the remote. Also, ensure that the IR transmitter and receiver are close to each other without any obstructions.
General| Brand | Lightmaxx |
|---|---|
| Model | Vector Haze 1.0 |
| Category | DJ Equipment |
| Language | English |
Warning against opening the device due to electric shock risk.
Keep packaging material away from children due to suffocation risk.
Do not remove housing; internal components carry high electrical voltage.
Modifications to the mains cable or plug are prohibited due to fire/shock hazard.
Avoid direct heat sources, open fires, and blocking ventilation slots.
Ensure device complies with regulations and is secured by a second cable.
Do not connect DMX to audio devices; use proper DMX cables, not microphone cables.
To Next Page