Lightmaxx Vega BAR RGBW - Device Operation and Controls; Starting the Device; Connections Overview; Menu Navigation

ENGLISH
Operation:
Start:
Connect the device to the mains and wait a few seconds until it is ready for operation.
Connections and controls:
Menu:
Navigation in the menu is via the four menu buttons below the display. Use the "Mode" button to
activate the menu, navigate via the "Up" and "Down" buttons. A corresponding selection is
confirmed with the "Enter" key.
No.
Designation
No.
Designation
1
Menu buttons
6
Power Output/Link (IEC Out)
2
LCD-Display
3
DMX In (3-pol)
4
DMX Out (3-pol)
5
Power Connection (IEC In)