11
Bluetooth Mode—ON and OFF
ON: With Sierra turned ON, press and hold the
Bluetooth button; see page 7, until you hear
a high tone and the Bluetooth indicator LED
ashes three blue pulses. For rst time pairing
see instructions on this page.
OFF: Press and hold Sierra’s Bluetooth button for
about three seconds until a high tone is emitted
and the Bluetooth indicator LED ashes three
red pulses.
Note: The Bluetooth feature must be turned ON for
Bluetooth connected devices to correctly function.
When you turn on the Sierra Bluetooth mode it
will connect to the most recently paired device.
Most Bluetooth cell phones connect to Sierra
automatically. If that doesn’t happen it may be
necessary to use the cell phone menu of found
devices to signify Lightspeed-V### (numbers
may vary).
Note: The microphone will not transmit unless
plugged into an intercom.
Note: Sierra will not stream music wirelessly.
Bluetooth and Cell Phones
To Next Page
Loading...
