17
Pairing Microphones to Topcat
SET-UP & OPERATION
Your system is shipped with microphones and base units pre-paired for quick and easy use.
If, for any reason, you need to pair new components, follow this pairing process:
SHAREMIKEFLEXMIKE
TOPCAT
From a powered o state, point
the IR transmitter lens toward
the base unit (for Sharemike, the
transmitter lens is located on
the back of the microphone).
1
Press and hold the power button
for 5 seconds until the mic 1 and
mic 2 lights start flashing, then
release the button and let the
pairing process finish.
2
The ”status” light on the base unit
will light up indicating the pairing
process is complete. The mic 1 or
mic 2 light on the microphone will
stay illuminated.
3
IR TRANSMITTER
BACK FRONT
MIC 2
POWER
MIC 1
MIC 2
MIC 1
POWER
IR TRANSMITTER
To Next Page
Loading...
