LightwaveRF JSJS LW300 User Manual

Plug-In Adapter (Dimmer) Socket
Operation Manual
Model No: JSJS LW300/301
OVERVIEW:
connect
LightwaveRF
IMPORTANT: PLEASE RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE AND FOR GUIDANCE ON
THE ASSOCIATION OF REMOTE HANDSETS. FOR
HELP AND SETUP GUIDANCE PLEASE VISIT
www.lightwaverf.com
It is important to install this product in accordance
with the tting instructions below. Failure to do so
may render your guarantee void.
Manual
Blue/
Amber LED

LightwaveRF JSJS LW300 Specifications

Power

input rating	220-230V~ 50Hz
load	300W

Wireless

RF frequency	433.92 MHz

Summary

Overview

Setup

Pairing with handheld remote transmitters

The adaptor can pair with up to 6 different remote transmitters at any one time.

Pairing using LEARNING MODE

Ensure the adaptor is plugged in and the wall socket is turned on.

Un-pairing remotes and clearing the Switch memory

Removing single device

Steps to un-pair a single remote transmitter from the adaptor.

Clearing Memory

Procedure to remove all paired remotes and clear the adaptor's memory.

OPERATION

Switch 'ON/OFF'

Manual control of the adaptor's on/off function using the device button.

On/Off control with Remote Handset

Using a remote handset to turn the adaptor on and off.

Dimming control with remote handset

Lowering Dim Level

How to decrease the light brightness level using the remote handset's 'OFF' button.

Raising Dim Level

How to increase the light brightness level using the remote handset's 'ON' button.

SPECIFICATION