LIHUIYU M2 User Manual

LIHUIYU M2 Nano Laser Controller Set
Features:
M2 motherboard is a square port USB interface motherboard:
1. Support carving, cutting, image engraving, slow marking
2. Support for receiving unlimited number of engraving data
3. Support USB dropped breakpoints continued
4. Support unlimited engraving formats
5. Support USB dropped detection
6. Supports accidental breakpoints
M2 Nano Laser Controller Motherboard:
1. X-Axis Stepper Motor
2. Y-Axis Stepper Motor
3. LO: Laser Control Signal Output. Low Level (≤0.3V), Laser On. High Level (5V), Laser Off.

LIHUIYU M2 Specifications

General

Brand	LIHUIYU
Model	M2
Category	Motherboard
Language	English

Summary

Product Features

M2 Nano Motherboard Components

X-Axis Stepper Motor Connection

Designates the connection point for the X-axis stepper motor.

Y-Axis Stepper Motor Connection

Designates the connection point for the Y-axis stepper motor.

Laser Control Signal Output (LO)

Laser control signal output: Low level (≤0.3V) for Laser On, High level (5V) for Laser Off.

M2 Controller Panel Overview

Digital Display

Digital display showing the laser energy percentage, accurate to 0.1%.

Laser Energy Settings Button

Button used to set laser energy, with a range of 0% to 99.9%.

Emergency Laser Off Function

Press both buttons simultaneously to force laser off; press any button to restore data.

Laser Status Indicator

Indicates the current status of the laser.

Test Button

Button for testing the laser controller functionality.

Laser Power Supply Connection

Connection point for the laser power supply.

Wiring Diagram and Connections

Packaging List