EasyManua.ls Logo

Liko Uno 200 - Safety Instructions

Liko Uno 200
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 www.liko.com
Uno 200 • 7EN150105-03
Safety Instructions .......................................................2
Definitions ....................................................................3
Technical Data .............................................................3
Measurements ......................................................... 4-5
Assembly ................................................................. 6-7
Operation ................................................................. 7-8
Adjustments .................................................................9
Charging the Batteries ...............................................10
Maximum Load ..........................................................11
Recommended Lifting Accessories ......................11-12
Simple Troubleshooting ............................................13
Care and Maintenance ..............................................14
Table of Contents
NOTE! This instruction guide contains information that is important for users of the product. A complete under-
standing of the contents of the instruction guide is essential, and only personnel who are well informed should use
the equipment.
Remember to keep the instruction guide readily accessible for users of the product.
Safety Instructions
Before using the lift for the first time, make certain that:
the lift is assembled according to the assembly instructions
the lifting equipment is correctly applied to the lift
the batteries have been charged for at least 12 hours
you have read and understood the instruction guides for the lift and lifting accessories
personnel using the lift have received appropriate instructions and training.
Before lifting always make certain that:
you have selected the correct type, size, material, and design of slings and accessories to safely meet
the patient’s needs
lifting accessories are not damaged
the lifting accessory is correctly applied to the lifting equipment
the lifting accessory is correctly and securely applied to the patient, so that no personal injury can occur
the sling’s strap loops are correctly fastened to the sling bar hooks when the sling strap is extended, but
before the patient is lifted from the underlying surface
the lift is set for the correct max. load.
Never leave a patient unattended in a lifting situation!
Uno 200 is tested by an accredited testing institute and comply with the requirements of the directives for medical-
technical Class 1 products (MDD 93/42/EEC).
Uno 200 complies with the requirements according to IEC 60601-1, IEC 60601-1-2, EN ISO 10535, UL-60601-1
and CAN/CSA C22.2 No. 601.1.
No modification of this product is allowed. Contact Liko for further information.
Particular care must be taken when using strong sources of electromagnetic interference, such as diathermy, etc,
so that cables are not positioned on or near the lift. If you have questions, please consult the responsible assistive-
device technician or the supplier.
This equipment is not suitable for use in the presence of flammable mixtures.
Maximum load: 160 kg (350 lbs) / 200 kg (440 lbs) depending on mounting alternative (see page 5).

Other manuals for Liko Uno 200

Related product manuals