Manual Thermometer Limit 60
Digital thermometer with two inputs for measuring with two probes at same time.
Up
to 99 measurements can be stored over a period of time, by setting automatic logging
inte
rval or manually stored. Stored measurements can be transfer to PC.
The display shows Max-Min-Average and diff
erence between two probes. Hold function.
Easy to compensate for errors of a probe. D
isplay backlight. Switchable between °C and °F
Warning of low battery capacity.
Probes of type K, J, T and E can be used.
Specification
Range
type K °C -200 … +1370
Reading
°C 0,1
Accurac
y °C 0,8 ± 0,5 %
Operation
temperature °C -10 … +50
Storage temperat
ure °C -40 … +60
Dimension mm 175x85x30
Weight
g 270
Battery 1 pc 9 V 6F22
Saftey informations
CE. Safety EN55022, EN55024
EN61326
Electrical equipment for measurement, control and laboratory use.
Buttons
On / Off
On / Off Display backlight
HOL
D On / Off Display backlight
°C°F K Select between Celsius Fahrenheit and Kelvin.
MAX/MIN
Toggle between max, min, and average.
T1 T2 T1-T2 Toggle bet
ween T1 and T2 and different between T1 and T2.
SEN
D Enter USB mode for connection to PC.
STORE
Start logging mode. Memory for 99 readings.
RECALL
Show logged readings.
SETUP
Start and exit setups
Increase and decrease by setup.
ENTER
Confirm setup.
SET UP Toggle with SETUP button between the different setup options.
Confi
rm selected setup with ENTER.
Logging interval
Display shows INTERVAL. Select logging interval.
Press
with Interval from 0:01 to max 59:59 minutes.
For
manual interval set 0:00.
Probe type
Display shows TYPE. Select type K, J, T or E with .
Chance Offset Display
shows OFFSET T1. Press with until the display
shows correct reading for T1 . Repeat for T2.
To Next Page
Loading...