Turning Off the Alarm
The alarm will ring for 3 minutes before the automatic shut-off triggers.
1. Press any button to enter Snooze Mode. The Alarm Indicator will flash while in
Snooze Mode and it will ring again in 5 minutes. The alarm can be snoozed twice.
2. Press and hold the Plus (+) or Minus (-) Button to turn off Snooze Mode and
deactivate the alarm.
Adjusting the Brightness:
The default is set to the maximum brightness level. To adjust the brightness, press the
Minus (-) Button to decrease the brightness and press the Plus (+) Button to Increase the
brightness.
Brightness Modes: Max | High | Mid | Low
Charging a Mobile Device:
1. Place a compatible device on top of the Wireless Charger. If there is a successful
connection the Wireless Indicator Light will illuminate.
2. Plug a USB cable into the USB-A Output & into a device. The device will begin to
charge.
Wireless Indicator Light:
• Successful – Blue Light Flashes Once
• Standby – Light Off
• Charging – Blue Light On
• Charged – Light Off
• Error – Blue Light Flashes Continuously
Using the LED Light:
1. Press the Light Button once to turn the LED Light on. The White Light Mode will turn
on.
2. Single click the Light Button to cycle through the 9 light modes:
1. White
2. Alternating Colors
3. Red
4. Orange
5. Yellow
6. Green
7. Blue
To Next Page
Loading...