The PowerTrio is a multi-functional device that serves as an alarm clock, wireless charger, USB charger, and LED night light. It is designed to be a versatile bedside companion, offering various features for convenience and utility.

Function Description:

The PowerTrio primarily functions as a digital alarm clock with two independent alarm settings. It also integrates a wireless charging pad for compatible mobile devices and a USB-A output for charging other gadgets via a cable. Additionally, it features an LED light with multiple color modes, which can be used as a night light or for ambient illumination. The device includes a backup battery to maintain alarm settings during power outages, ensuring reliability.

Important Technical Specifications:

Model: LIM-PTRIO-XXX
Backup Battery: CR2032 Coin Battery (pre-installed)
Night Light Source: LED
Time System: Supports both 24-Hour and 12-Hour formats.
Clock Brightness: Adjustable with Max, High, Mid, and Low settings.
Type-C Input: 5V/3A | 9V/3A | 12V/2A (for powering the device)
Wireless Output: 5W, 7.5W, 10W, 15W (for wireless charging)
USB Output: 5V/2A (for wired charging)
Size: 5.51" x 4.61" x 2.87"
Weight: 0.485 lb

Usage Features:

Setting Up:

To set up the PowerTrio, plug the provided Type-C to USB Cable into the USB Wall Adapter and then into the device's Type-C Input. The digital display will cycle upon connection.

Setting the Clock:

When the colon (":") on the display is blinking, press the Alarm Button twice slowly to switch between 12-hour and 24-hour time systems. The display will show "12hr" for the 12-hour system, along with AM/PM indicators. A short pause between clicks is recommended for this "double click" action.
Press the Alarm Button once to enter the minute setting. Use the Plus (+) and Minus (-) Buttons to adjust the value.
Press the Alarm Button again to enter the hour setting. Use the Plus (+) and Minus (-) Buttons to adjust the value.
Press the Alarm Button one more time to finalize the time setting; the colon will then flash. Note: If in time setting mode with flashing minutes or hours, press the clock button until only the colon is blinking to return to the main screen before attempting to switch time systems.

Setting & Using the Alarm:

To activate or deactivate Alarm 1, press and hold the Plus (+) Button for 3 seconds. To activate or deactivate Alarm 2, press and hold the Minus (-) Button for 3 seconds. The corresponding Alarm Indicator icons will illuminate when activated.
While an alarm is activated, press and hold the Alarm Button for 3 seconds to enter the alarm time setting mode. Follow the same steps as "Setting the Clock" (steps 2-4) to set the desired alarm time for both Alarm 1 and Alarm 2.

Checking the Alarm Setting:

First, activate the alarms you wish to check (as described above).
Press and hold the Alarm Button for 3 seconds to enter the alarm time setting mode. This will display the set time for Alarm 1 first.
Press the clock button repeatedly to cycle through and display the set times for:
- Alarm 1 – Minutes
- Alarm 1 – Hours
- Alarm 2 – Minutes
- Alarm 2 – Hours

Turning Off the Alarm:

The alarm will ring for 3 minutes before automatically shutting off.

Press any button to enter Snooze Mode. The Alarm Indicator will flash, and the alarm will ring again after 5 minutes. Snooze mode can be activated twice.
To turn off Snooze Mode and deactivate the alarm completely, press and hold either the Plus (+) or Minus (-) Button.

Adjusting the Brightness:

The default display brightness is set to maximum.

Press the Minus (-) Button to decrease the brightness.
Press the Plus (+) Button to increase the brightness. Brightness modes include Max, High, Mid, and Low.

Charging a Mobile Device:

Wireless Charging: Place a compatible mobile device on top of the Wireless Charger. The Wireless Indicator Light will illuminate upon a successful connection.
- Wireless Indicator Light Status:
  - Successful: Blue Light Flashes Once
  - Standby: Light Off
  - Charging: Blue Light On
  - Charged: Light Off
  - Error: Blue Light Flashes Continuously
Wired Charging: Plug a USB cable into the USB-A Output port on the PowerTrio and connect the other end to your device. The device will begin to charge.

Using the LED Light:

Press the Light Button once to turn on the LED Light. It will initially turn on in White Light Mode.
Single-click the Light Button repeatedly to cycle through the 9 available light modes:
1. White
2. Alternating Colors
3. Red
4. Orange
5. Yellow
6. Green
7. Blue
8. Dark Blue
9. Pink
To turn off the LED Light without cycling through all modes, press and hold the Light Button.

Maintenance Features:

Backup Battery:

The CR2032 Coin Battery is pre-installed in the Backup Battery Slot. This battery ensures that alarm settings are saved in the event of a power outage, maintaining the device's functionality.

Safety and Care Warnings:

The PowerTrio is not a toy and should be kept away from children.
Avoid using the device near magnetic or electric fields.
Do not expose the PowerTrio to direct sunlight or extreme heat for extended periods.
Do not use the device if it has been damaged or modified.
Do not subject the PowerTrio to harsh chemicals.
Do not submerge the PowerTrio or its accessories in water.
Do not store the PowerTrio in temperatures exceeding 140° F (60° C).
Do not insert foreign objects into any openings or ports.
Do not attempt to disassemble, repair, or open the PowerTrio or its accessories.
Do not paint or apply coatings to the PowerTrio, as this may affect moving parts or damage internal components.
Batteries should be recycled or disposed of according to state and local guidelines.

LIMITLESS PowerTrio - Backup Battery Function