EasyManua.ls Logo

Lincat EB4F - Operation; First Use; Regular Operation; Changing Settings

Lincat EB4F
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IS 339 ECN 3607 Page 7 of 11
Fig 2
To replace the filter:
Twist the base of the filter (G) 90 degrees to the left and lower the cartridge out of
the appliance. It will contain a small amount of water.
Remove the black cap and place it on the new filter.
Re- insert the filter into the recess and lock in place by twisting to the right.
Press and hold the Fn button for 5 seconds to reset the filter life.
Drain off approximately 5 litres of water to remove any loose carbon particles from
the filter.
CLEANING
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean all panels with warm water and mild detergent, do not use abrasive
materials. Dry with a soft cloth.
Slide out and empty the drip tray (H) regularly, and wipe the dispensing tap spout
daily to remove lime scale deposits.
De-scaling
The boiler should be de-scaled regularly to maintain efficient operation and water
quality. The frequency depends on the hardness of the water and timely
replacement of the filter.
The de-scaling procedure must be performed by trained personnel as it
requires the removal of panels from the boiler giving access to live electrical
components.
FILTER
READY
STANDBY
CLEAR
CHANGE
FILTER

Other manuals for Lincat EB4F

Related product manuals