This appliance must be installed, commissioned and serviced by a qualified person
in accordance with national and local regulations in force in the country of
installation.
If a supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person.
Ensure that the plugs/sockets are accessible at all times.
Strip plastic coating and clean the appliance before use.
During operation parts may become hot - avoid accidental contact.
Disconnect all supply cords before servicing, maintenance or cleaning.
Caution symbol: Non-ionising electromagnetic radiation (magnetic field).
Warning symbol: Dangerous voltage (live parts at a working voltage exceeding
250v).
To Next Page
Loading...