To Next PageTo Next Page
Need help?Do you have a question about the Lincoln Electric INVERTEC V276 and is the answer not in the manual?
General| Input Voltage | 208/230/460V |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Current Range | 5-275A |
| Protection Class | IP23 |
| Output Voltage Range | 10 - 31 V |
| Processes | Stick, TIG |
Protect eyes, ears, and body with appropriate gear.
Addresses specific hazardous scenarios and additional safety measures.
Warnings regarding chemicals known to cause cancer and birth defects.
Detailed safety advice for arc welding, including pacemaker warnings.
Guidelines for safe engine operation, ventilation, and refueling.
Precautions against fire and explosion from welding sparks.
Safe practices for handling compressed gas cylinders to prevent explosion.
Guidelines for safe electrical installation and grounding.
Details on input voltage, current, and efficiency for different phases.
Welding current range and no-load voltage.
Guidelines for selecting appropriate input wiring and fuses.
Dimensions, weight, and operating/storage temperature limits.
Advice on locating the machine away from RF controlled machinery.
Guidelines for choosing an appropriate, safe, and well-ventilated location.
Instructions for connecting the machine to the power supply, including wiring and fuses.
Warnings against stacking and proper placement to prevent toppling.
Steps to adjust the machine for different input voltage ranges.
Details on connecting output cables and using quick disconnect plugs.
Essential safety rules to follow while operating the machine.
Overview of the machine's purpose, capabilities, and operational features.
Information on welding performance, duty cycles, and usage restrictions.
Explanation of warning and status symbols used in the manual and on the machine.
Detailed explanation of all front panel controls and their functions.
How to perform Stick, Air Carbon Arc Cutting, and TIG welding.
Details on parallel operation, overload, thermal protection, fan, and power-up sequence.
Controls for remote adjustment of output settings.
Accessories for TIG welding torches and stick welding kits.
Systems for grouping multiple inverter power sources.
Safety procedure to discharge capacitors before servicing.
Schedule and steps for regular preventive maintenance tasks.
Advice on using load banks and verifying current/voltage calibration.
Step-by-step guide for calibrating the machine.
Explains how to calculate and set offsets for calibration.
Procedure to access the machine's calibration mode.
Instructions on how to navigate and utilize the troubleshooting section.
Procedures for diagnosing and resolving issues related to PC boards.
Solutions for issues like no output or fan operation without output.
Diagnosing intermittent output and non-functioning remote controls.
Troubleshooting blown input fuses and incorrect voltage connections.
Addressing issues where the machine output is limited to 200 amps.
Solutions for poor welding quality, drifting settings, and arc instability.
Troubleshooting problems with the thermal indicator light and fan operation.
Electrical wiring schematic for the Invertec V276.
Technical drawing showing the physical dimensions of the machine.
Lincoln Electric's policy on providing advice and information, disclaiming liability.
