To Next PageTo Next Page
Need help?Do you have a question about the Lincoln Electric outback 185 and is the answer not in the manual?
General| Engine | Kohler CH440 |
|---|---|
| Fuel | Gasoline |
| Maximum Open Circuit Voltage | 80 Volts |
| Input Voltage | 120/240V |
| Weight | 208 lbs |
| Dimensions | 28 in x 20.1 in x 40.5 in (711 mm x 510 mm x 1029 mm) |
| Welding Processes | Stick, TIG |
| Generator Power | 7000 Watts Peak, 5500 Watts Continuous |
| Engine Power | 14 HP |
| Output Range | 50-185A DC |
| Rated Output | AC: 185A AC, 23V, 50%, DC: 175A DC, 23V, 50% |
General safety principles, hazard identification, and proper operation awareness.
Specific state warnings regarding diesel exhaust and welding fumes.
Guidelines to prevent injury from electric shock during operation.
Safety measures for protecting eyes, skin, and respiratory system from welding hazards.
Precautions against fire, explosion risks, and safe handling of gas cylinders.
Details on the gasoline engine, welder, and generator capabilities.
Machine dimensions, weight, and operating temperature ranges.
Proper placement, ventilation requirements, and storage guidelines for the machine.
Procedures for checking oil, fuel, and other engine preparations before use.
Instructions for connecting welding cables and proper machine grounding.
Details on auxiliary power outlets and precautions for connected electrical devices.
Essential safety rules to follow during operation.
Explanation of equipment symbols used in the manual and on the machine.
Descriptions of the output panel and welder/generator controls and settings.
Procedures for starting, stopping, and breaking in the engine.
Step-by-step guide for performing welding tasks.
How to use the machine as a generator for external power.
Details on accessory kits for welding and general use.
Accessories for lifting, transport, and protecting the machine.
Procedures for regular engine upkeep, including oil and air filter service.
Steps for servicing the spark plug and other engine components.
Instructions on how to effectively use the troubleshooting section.
Diagnosing and fixing issues related to power output and engine performance.
Identifying and resolving problems affecting the welding arc quality.
Electrical schematic of the machine and its accompanying legend.
Visual representations of the machine's physical dimensions and views.
Overview of major component groups for parts identification.
Specific parts list for the cradle, battery, and roof assembly.
Specific parts list for the control panel assembly.
Specific parts list for the stator, rotor, and engine assembly.
Specific parts list for the rear control panel and fuel tank assembly.
Lincoln Electric's policy regarding customer support and technical information.
Information regarding the operation and maintenance of fume control systems.
