Lincoln Electric OUTBACK 185 IM972 User Manual

®

• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
OUTBACK 185
™
OPERATORʼS MANUAL
IM972
September, 2010
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However,
your overall safety can be
increased by proper installation
... and thoughtful operation on
your part. DO NOT INSTALL,
OPERATE OR REPAIR THIS
EQUIPMENT WITHOUT READ-
ING THIS MANUAL AND THE
SAFETY PRECAUTIONS CON-
TAINED THROUGHOUT. And,
most importantly, think before
you act and be careful.
For use with machines having Code Numbers:
11516
Copyright © Lincoln Global Inc.

Lincoln Electric OUTBACK 185 IM972 Specifications

General

Generator Compatible	Yes
Maximum Open Circuit Voltage	80 V
Frequency	60 Hz
Efficiency	85%
Fuel Type	Gasoline
Process	Stick, TIG
Rated Output	185 A at 25 V
Input Current @ Rated Output	23A @ 240V
Fuel Tank Capacity	5.5 gal
Noise Level	76 dBA at 7 meters