Lincoln Electric RANGER 305D Service Manual

SVM175-A
July, 2007
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However,
your overall safety can be in-
creased by proper installation . . .
and thoughtful operation on
your part. DO NOT INSTALL,
OPERATE OR REPAIR THIS
EQUIPMENT WITHOUT
READING THIS MANUAL AND
THE SAFETY PRECAUTIONS
CONTAINED THROUGHOUT.
And, most importantly, think
before you act and be careful.
SERVICE MANUAL
For use with machines having Code Numbers: 10926, 11121, 11188, 11275 (Domestic)
11027, 11122, 11189, 11314 (UK)
11039, 11123, 11190, 11315 (EUROPE)
Ranger 305D
TM
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
View Safety Info View Safety Info View Safety Info View Safety Info
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 1-888-935-3877 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
DD
Copyright© 2007 Lincoln Global Inc.
All manuals and user guides at all-guides.com
all-guides.com

Lincoln Electric RANGER 305D Specifications

General

Max Output	305 A
Fuel Type	Diesel
Frequency	60 Hz
Phase	Single Phase
Type	Engine Driven Welder
Output Range	30-305A
Rated Output	250 Amps
Generator Output (Continuous)	10, 000 Watts
Generator Output (Peak)	12, 000 Watts
Auxiliary Power (Continuous)	10, 000 Watts
Auxiliary Power (Peak)	12, 000 Watts
Fuel Tank Capacity	12 Gallons
Processes	Stick, TIG, MIG
Welding Processes	DC TIG
Engine Speed	3600 RPM
Voltage Output	120/240V