Lincoln Electric RANGER 8 User Manual

RANGER
™
8
OPERATOR’S MANUAL
For Machines with Code Numbers 10373, 10374, 10375, 10376,
10535, 10536, 10537,10538, or
10541,10886
IM510-E
January, 2002
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT READING THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
R
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Date of Purchase:
Serial Number:
Code Number:
Model:
Where Purchased:
Copyright © 2002 Lincoln Global Inc.

Lincoln Electric RANGER 8 Specifications

General

Max Output	8, 000 watts
Fuel Type	Gasoline
Dimensions	Height: 30.3 in (770 mm), Width: 20.3 in (516 mm), Length: 48 in (1219 mm)
Fuel Tank Capacity	6.5 gallons
Welding Processes	Stick, TIG, MIG
Open Circuit Voltage	80 V
Engine	Kohler
Auxiliary Power	120V/240V, 60Hz
Welding Output	225 A at 25 V