Lincoln Electric VIKING 1840 Series User Manual (English)

Questions and Answers:

P
Paula SotoJul 26, 2025
What to do if the Lincoln Electric Motorcycle Accessories filter does not darken when arc is struck?
- T
  Timothy GregoryJul 26, 2025
  If the Lincoln Electric Motorcycle Accessories filter isn't darkening when you strike an arc, several factors could be at play. First, the sensitivity might be set too low, so try adjusting it to the required level. A dirty or damaged front cover lens can also cause this issue; clean or replace it as needed. Ensure that you are not blocking the sensors or solar panel. Another possibility is that the grind mode is selected, so make sure the proper shade is selected.
P
Patricia RiceAug 2, 2025
How to improve visibility through my Lincoln Electric VIKING 1840 filter?
- W
  William WilliamsAug 3, 2025
  If you're finding it difficult to see through the filter of your Lincoln Electric Motorcycle Accessories, the issue might be a dirty front cover lens. Try cleaning or replacing it. Another potential cause is a dirty cartridge. Clean the Auto-Darkening cartridge with soapy water solution and a soft cloth.
M
Melissa SpearsAug 9, 2025
Why does my Lincoln Electric VIKING 1840 filter stay dark after welding?
- T
  Theresa WardAug 9, 2025
  If your Lincoln Electric Motorcycle Accessories filter remains dark after you've finished welding, it could be due to a delay time set too high; adjust the delay time to the required level. If the ADF is cracked, cease using this product. Also, weld spatter might be damaging the filter, so replace the front cover lens as needed.
K
kcooperAug 17, 2025
What causes my Lincoln Electric Motorcycle Accessories filter to darken without welding?
- J
  jillsaundersAug 17, 2025
  If your Lincoln Electric Motorcycle Accessories filter is darkening without an arc being struck, the sensitivity might be set too high. Try adjusting the sensitivity to the required level.

Lincoln Electric VIKING 1840 Series Specifications

General

Shade Range	9-13
Helmet Material	Nylon
Sensors	2
Power Supply	Solar and replaceable batteries
Standards	ANSI Z87.1, CE
Storage Temperature	-40°F to 158°F (-40°C to 70°C)